Frequently Asked Questions
If You’ve Got Questions. We’ve Got Answers!
The SEER (seasonal energy efficiency ratio) is how the efficiency of your heating and cooling equipment is measured. The SEER is the amount of cooling your system will deliver per dollar spent on electricity, as compared to other systems. For example, a 3-ton unit may have a SEER efficiency rating of 13, 14, or 15. The higher the SEER the more efficient the system will be. The SEER rating of any given unit can range anywhere from 13 to 21.
Each split system cooling unit has a nominal SEER rating. This rating can be increased with the upgrade of the same series indoor unit. The SEER rating of a system is derived based on the combination of equipment installed in the home. The outdoor equipment (heat pump or air conditioner), as well as the indoor equipment (evaporator coil and furnace, or air handler), play a vital role in the total rating.
Your heating and cooling systems work incredibly hard to perform their functions for your home everyday. The constant stopping, starting and continual operation can wear down any machine if the proper care and maintenance is delayed. However, by performing regular maintenance, you can maximize the lifecycle of your heating or cooling unit and guard against many common equipment failures. Preventive maintenance inspections performed on a regular basis can uncover leaks, rust, rot, soot, frayed wires and corroded electrical contacts that the naked eye may not notice. You should have maintenance done on your system regularly to ensure maximum efficiency and allow prevent possible problems that may occur in the near future.
At least twice a year heat pumps and air conditioners require a professional tune-up. Because gas-fired equipment functions with greater efficiency, they only need to be serviced every other year. Inspections on boiler and furnace systems should include ductwork, pipes, dampers, valves, the chimney, registers, radiators, pumps, blowers, fuel lines, the gas meter, oil tank and every part of the actual furnace and boiler. Meanwhile, heat pump and air conditioning unit inspections should also include inspections of the fan, compressor, indoor coils, outdoor coils, line kits and refrigerant lines.
As your local Carrier dealer, GB Services Inc. is your troubleshooting expert, and is glad to help you. In addition, Carrier also provides a network of troubleshooting technicians at Carrier Distribution centers across the country which GB Services Inc. will utilize to solve your concern. Should we encounter a situation that requires additional factory help, we will contact our factory supported Service Manager(s) for assistance.
Standard filters work to keep your system and its ductwork clean, but they don’t really improve indoor air quality. To do that you need a media filter. The media filter rests between the main return duct and the blower cabinet and will improve dust and particle removal by seven times that of a standard filter. However, upgrading to a pleated media filter will remove everything from insecticide dust to airborne viruses from the filtered air. Always choose a filter that matches your blower’s capacity. For optimum efficiency and filtration, GB Services Inc. recommends that you replace your disposable filters at least once a month. If you have washable filters, they should be cleaned once a month.
Since they are electronic, programmable thermostats are more accurate and efficient than thermostats that contain mercury. With programmable thermostats you can control the temperature in your home at different times of day without ever touching your thermostat. Because everything is automatic, you will never forget to change the setting on your own.
The filter shipped with your Carrier unit is made from higher-quality materials than those of the disposable filters found in retail stores. For that reason, replacement Carrier filters can only be purchased through a Carrier dealer. However, keep in mind that some Carrier filters are reusable, and can be washed by hand in cold water.
As a Carrier dealer, GB Services Inc. is the best resource for identifying and supplying the correct, current parts for your system, as well as pricing and availability.
There are many factors that affect the sizing and specifications of your system, including square footage, insulation, window surface and configuration, geographic location of your home, duct sizing and arrangement, and many others. GB Services Inc. can perform an in-home load analysis to determine which equipment combinations will perfectly suit your home and your family’s needs. Depending upon the construction of your home, one (1) ton of air conditioning can cool anywhere from 300 to 800 square feet of home. The only way to insure the size of the system you purchase will be large enough to cool your home, but not any larger than you need, is to have your home’s individual heating and cooling needs evaluated by a licensed professional.
Under the standard factory warranty, Carrier covers parts that fail during the warranty period due to defect in the part. The warranty does not cover labor. A warranty certificate was included with your homeowner information packet, and is specific to the model numbers, serial numbers and installation dates of your products. If you cannot find your warranty certificate, GB Services Inc. will also be able to provide you with the information.
Dependable Carrier products are among the longest lasting heating and cooling products available. For your specific equipment, there are many variables that affect life expectancy, and of course, the regularity of routine maintenance.
HVAC is short for Heating, Ventilation and Air Conditioning. HVAC is most oftenused to depictthe whole heating and cooling system consisting of the duct work, air filters, humidification controls, and registers.
The most important part of HVAC maintenance aspect is maintaining unrestricted air flows. Dust, dirt, and debris are an HVAC system’s worst enemies. Whether it’s an indoor or outdoor unit, you must keep all filters clean and heat exchangers and coils free of restrictions.
We recommend that your heating and cooling system be checked and serviced twice a year; ideally a spring and autumn tune-up. Also we recommend that you change your filter regularly, depending on the type of filter you have. This alone can eliminate many of the most common problems that need fixing and can significantly reduce the likelihood of a serious breakdown.
Locate the label on the outer surface of the equipment for a manufacture date. If the equipment is less than five years old it may have a warranty, but also may not based on the model. Warranty terms and conditions change by manufacturer and the installing company. GBS HVAC can verify the warranty status of your heating and cooling system via Get Warranty form.
Regular filter replacement helps your heating and cooling system operate at peak levels and improves indoor air quality. It is important to change filters regularly to ensure proper air flow and to keep your home free from dust, allergens and germs. Depending on the type of filter you have, you may require weekly or monthly filter replacements. Your GBS HVAC service or installation technician will recommend the ideal filters and replacement schedules for your unit(s).
Yes. Loud heating and cooling equipment contribute to sound pollution. Although no financial savings are tied to lower sound levels, the sound rating of a cooling system can have a considerable effect on comfort and enjoyment of your home. The sound level of an air conditioner or heat pump depends on a variety of factors, such as the age and make of the unit, and whether the compressor is insulated or not can contribute to the amount of noise it makes.
Bigger isn’t always better; its performance and efficiency that count. Before purchasing a replacement system you should always make sure your system is sized properly to match your needs and budget. Your AirPro Expert will thoroughly assess your home and comfort requirements to determine the proper size and make the appropriate recommendation.
A few quick tips:
- Clean and replace your filters frequently.
- Your system will heat and cool more evenly when the blower is in the “on” position. The blower provides constant air movement throughout the home, and allows for better filtration.
- Install shades, drapes, shutters, or screens on windows that are exposed to extreme sunlight to keep room temperatures at moderate levels.
You may have tried to cover up indoor odors by spraying air fresheners or lighting candles. Unfortunately, these tactics only mask the odors, they don’t get rid of them. These remedies may in fact negatively affect indoor air quality from chemicals that cause allergic reactions or eye irritation for homeowners.
Bacteria, dust mites, animal dander, cat saliva and mold may also be roots of your home’s odor problem. One method to purify the air is integrating germicidal (UV) lights in your home, which helps kill odors and inhibit the growth of biological contaminants, sterilizing surfaces in the HVAC system. They also purify the air, preventing the growth of contaminants. The UV lights are installed to work with your home comfort system.
Sometimes poor ventilation contributes to unpleasant odors. Moisture condensation on walls windows and stagnate air are signs of poor ventilation. A qualified Service Experts technician can inspect your home comfort system to determine if this is an issue that should be addressed. The technician can also inform you how to solve the ventilation system’s ability to correctly circulate and ventilate indoor air.
Every person and every home entails a different comfort need. The threshold of irritancy and triggers that affect people’s health and comfort combine to determine the proper solutions. High threshold levels may require simple solutions like a better air filter. Low threshold levels may require an air purification system for the reduction of triggers and irritants.
According to studies created by the U.S. Environmental Protection Agency, exposure to air pollutants indoors can be 100 times higher than outdoors. Frequent dusting and vacuuming can help reduce the amount of dust and dust mites present in your home. However, not all airborne particles can be eliminated. Filtration devices can help eliminate particles that are too small to be caught by a vacuum. Some filtration devices include UV light units, air filters, energy recovery ventilators (ERVs), heat recovery ventilators (HRVs) and electronic air cleaners. A Home Health Report Card from Service Experts will provide the information about which indoor air improvement devices are right for you.
Temperature settings depend on the time of year and your personal preferences. In the summer, the average temperature setting is 75°-80°. In the winter 68°-72° is the norm. Remember, when leaving your house; try to avoid drastic temperature changes. Do not set your temperature back more than 5°; this will cause your unit to work harder to achieve the desired temperature setting.